Setting up DMR for XLX867 on a PiStar Hotspot

1. Make sure the DMR mode is enabled Be sure to add your DMR ESSID if needed.

 2. On the configuration page, under “DMR Configuration” change the “DMR Master” to “DMRGateway” and APPLY.

3. Back under “DMR Configuration” change “XLX Master” to XLX_867    # I Recomended -  to disable DMR+ Network to disable the additional voice traffic.

 4. Choose Module “C” for the module (or B, C, D, E, …Z) - Note: Module C links to the 146.610 repeater in Pembroke, NH, Module C would be the best module to use for the most traffic.

5. Enable “XLX Master Enable“

6. Apply Changes, Restart the Pi-Star. Once the Pi-Star has restarted, Proceed to step 7

7. Go to the Dashboard, DMR should show linked to XLX867

In your DMR codeplug: 1. Create a new contact: Name: “XLX867  TG 6 .